GASKETS

We have now emerged as the largest Suppliers of Gasket materials.  We relentlessly work towards using futuristic technologies and techniques that will aid the production of materials.

“RTJ”(Ring Type Joing) Gaskets arer manufactured in accordance with API-6A and ASME B16.20 Specifications.  RTJs have ‘R’ Numbers assigned to them for  pipe size and pressure class identification.  Stock Materials Include Soft Iron, Low Carbon Steel, 4-6 Chrome (F5), 304, 304L, 316, 316L, 347, Inconel, Duplex, Super Duples Etc.

1. Ring Type Joint – (API Ring Joing Gaskets)
2. Special Ring Type Joint Gasket
3. BX & RX Ring Gaskets

Spiral Wound Gaskets are extremely popular and widely used.  A Spiral Wound Gasket is manufactured by spirally winding a preformed metal strip and a filler on the outer periphery of the Metal winding mandrels.  The winding mandrel outside diameter forms the inner diameter of the Gasket and superposed metal and nonmetallic Windings are continually wound until the required outer diameter is attained.

• Type CGI (Gasket with Centering Ring & Inner Ring)
• Type CG (Gasket with Centering Ring)
• Type GI (Gasket with Inner Ring)
• Type G (Gasket only)

Insulating sets are essentially used for pipeline flange corrosion protection, where a seal is required between dissimilar Flange Materials.  The use of dissimilar metallic Flanges with a conductive Gasket Material accompanied by a suitable electrolyte may set up a galvanic cell which will corrode the anodic Metal.  Insulating Sets are used to electrically isolate Flange Joints, preventing the flow of electrostatic charge along Pipeline.

We offer Five standard types of Insulating Sets to suit Raised Face, Flat Face & Ring Grooved Flanges.

1. Type-E (Full Face Type Gaskets)
2. Type-F (Raised Face Type Gaskets)
3. Type-D (RTJ Type Gaskets)
4. G10/G11 with Viton/Spring Energised Gaskets
5. Metal Core with G10/G11 Gaskets

We offer qualitative assortment of Polytetrafluoroethylene (F4, PTFE). Specification of Gaskets as per Following:-

1. Long Term Application Temperature : 250 Deg C to (-) 200 Deg C
2. Low Temperature : Soft Even at (-) 100 Deg C
3. Corrosion Resistance : Resistance to aqua regia and all organic solvents
4. Weather Resistance : Best aging life in plastic, High Lubricants
5. Smallest Coefficient of Friction in plastic : 0.04
6. Adhesion : Smallest surface tension in solid Materials, Nontoxic & Physiologically inert, excellent behavior of Electricity

Offering versatility and convenience in the form of  a highly conformable flexible strip is the expanded PTFE Gasket that is used in Non-Standard Flange applications.  It is also a backup sealing option under non Availability of conventional Gaskets.

Expanded PTFE Gaskets are suitable for Temperatures ranging up to 250 Deg Cand for Cryogenic Applications like Hydraulic Systems, Water Supply Systems, ventilation Ducts, Fan Housing, Fume Ducts, Pneumatic Systems, Engine Case Doors Etc.

Non-Asbestos Gaskets are used as Heat Exchanger Gaskets, Compressor & Bonnet Valve Gaskets and in Pipe Flange Application etc.

Compressed Non Asbestos Fibre Gaskets are circle cut for die cut Gaskets from compressed Non Asbestos Jointing, Manufactured from carefully picked fibre intimately blended with suitable heat resistant binders and vulcanized into sheets of Homogenous compositions and uniform thickness.

A “Heat Exchanger Gasket” is a term that has been given to the gasket that is called out for use in an exchanger.  The make up of the gasket or type varies due to the operating conditions of the Exchanger.  Jacketed Gaskets can come in different types like : Double Jacket, Single Jacket,  Soft Compressible Material can be PTFE, Non-Asbestos, Graphite & Ceramic.

1. Single Jacketed Gasket
2. Double Jacketed Gasket
3. Corrugated Metal Jacketed Gasket with Graphite on Top & Bottom

The Kammprofile is preferred Gasket when improved performance at low seating stresses is required.  It features excellent anti-blowout properties associated with the reliability of a solid metal-to-metal seal combined with soft sealing face to ensure a tighter joint.  Kammprofile is an ideal replacement for problem applications associated with Jacketed Gaskets.

1. Fabricated in nominal pipe size and pressure
2. Configured in standard shapes for Heat Exchanger Application
3. Available with Centering Ring for use on Raised Face Flanges
4. Metal Cores available in Soft Iron, Stainless Steel & Exotic Materials
5. Standard Surface Materials of Flexible Graphite, Nuclear Grade Graphite or Expanded PTFE
6. Low Sealing stress & Optimum combination of solid core with Soft Sealing Face

Our Range of O Rings & Gaskets is applied in various sealing Mechanism.  The specification of the Range are provided as follows:-

1. RANGE FOR ‘O’ RINGS

Available in Diameter range of 5mm to 2000mm and Various Cross Sections

2. RANGE FOR GASKETS

From 15mm to 2000mm and Pipe Sizes, made form Polymer – Natural, Nitrile, EPDM, Neoprene, SBR, Viton, Silicon, Butly, Lead Free Rubber Grades are also available for Nuclear Applications